|
|
Gloves and Hand Protection
|
|
|
|
|
Inspire confidence and boost productivity.
Choosing the correct glove for the job at hand is more than a personal preference. The table below illustrates the importance of material choice, chemical resistance, strength and allergenic properties. Our Rowe Scientific team can assist in recommending the right glove for your specific application.
|
|
|
|
|
Acceptable Quality Level, Chemical permiation and ergonomics testing.
Each line of Ansell glove undergoes a series of stringent tests to conform to European standards EN374-1 Chemical protection, EN374-2 Micro-organisms and EN374 -3 Chemical resistance against chemicals of choice (AQL <4).
|
|
|
|
AQL test:
Method ASTM D 5151
EN 374-2
AQL (Acceptable Quality Level) is a statistical measure of the level of defects that a process could run and be accepted.
The lower AQL demonstrates a higher level of consistency and process capability
|
|
|
|
Ergonomics:
Design to improve comfort and fit, by minimising the risk factors that may contribute to the development of ergonomic injuries. Factors considered are muscle strain, hand fatigue, pain and injury. These may effect wages, increase medical costs and cause a loss in productivity in general.
Wearing the correct glove reduces the risk of injuries.
|
|
|
|
Chemical Permiation test: Method EN374
The process by which a chemical moves through a protective glove material on a molecular or microscopic level.
Resistance to permeation by a chemical is determined by measuring the permeation breakthrough time (1µg/min/cm2).
|
|
|
|
Tensile strength test:
Method ASTM D 412-06A
The force measured over a cross-sectional area of a given material under strain. Measured at the instant the material fails in megapascals (MPa).
A higher tensile value indicates a stronger material while taking the thickness of the glove into consideration.
|
|
|
|
|
|
ROWE CODE: HG0240
NeoTouch® 25-101 / 201 Neoprene
POWDER FREE, TEXTURED
- Excellent resistance to acids
- Proprietary formulation provides excellent comfort
- Special coating aids in donning of gloves
- Thickness: 0.013mm
- Length: 240 or 285mm
- Unit of measure: 10x100 in a box
|
|
|
|
ROWE CODE: HG0080
Microflex ® 93-852 Nitrile
POWDER FREE, BLACK COLOUR
- Black colour masks stains and provides a contrasting backdrop for lighter material
- Non-foaming formular provides a consistent firm grip
- No natural rubber latex is used to mitigate type 1 skin irritation and dryness
- Thickness: 0.012mm
- Length: 240 or 285mm
- Unit of measure: 100 in a box
|
|
|
|
ROWE CODE: HG0190
MicroFlex® 93-843/853 Nitrile
POWDER FREE, TEXTURED
- Provides a durable, heavy duty coverage for a more demanding workload
- Textured fingertips for a consistent grip
- Low pinhole rate resists chemical permiation
- Thickness: 0.011mm
- Length: 240 or 285mm
- Unit of measure: 100 in a box
|
|
|
|
|
|
|
|
|
Contact us
Do you have a question?
Click on the button below
to send us an email.
|
|
|
|
|
|
|
Rowe Scientific Pty Ltd
www.rowe.com.au
We send this message to all Rowe Scientific Pty Ltd customers as a way of keeping you informed of special offers and company news. Unsubscribe
*Prices do not include GST and only while stock lasts.. We reserve the right to change specifications, details and descriptions without notice. Pictures for illustrative purposes only. Discounts do not apply to service, freight and or repair charges..
©2019 Rowe Scientific Pty Ltd. All rights reserved.
REF:599
|
|
